Best Christmas 3D Prints to Sell at Craft Fairs in 2026

3D printed Christmas items for sale at a craft fair booth, including glowing village lamp houses, flexi geese and Santa key ornaments

Quick answer

The best Christmas 3D prints to sell at craft fairs come in three price levels: impulse buys under $10 like personalized ornaments and keychains, mid-price best sellers from $10 to $30 like flexi geese, candle holders and tic tac toe boards, and one or two showpieces over $30 like light-up village houses and paper towel holders that pull shoppers into your booth. Price by print time, not filament, since the filament in a small ornament usually costs under $1.

A holiday market is the best weekend of the year to sell 3D prints, but only if you bring the right mix. Fill a table with big pieces and people walk past. Fill it with tiny trinkets and you barely cover your booth fee. This guide picks 13 Christmas designs from the Upfinityco Christmas collection, based on what makers ordered most from our shops in the past 30 days, and shows estimated print time, filament and a booth price idea for each one. All numbers are for reference only, not exact figures.

Every Upfinityco file comes with STL and 3MF formats and a free license to sell your prints at fairs, markets and online, with no print limit. Want ideas for your own home or gifts instead? See our Christmas 3D print ideas for decor and 3D printed Christmas gifts.

Quick picks

Best impulse buySanta Key Ornament Set
Best mid-price sellerFlexi Goose Shelf Sitters
Best booth showpieceChristmas Village Lamp Set

All 13 designs at a glance

Use this table to plan your stock and prices. Times and weights are for one piece, and booth prices are starting points to adjust for your local market.

For reference only. These are estimates, not exact figures. All print times, filament weights, costs and booth prices in this guide are rough estimates to help you plan. They assume one piece printed on a Bambu Lab P1S at 0.2 mm layers in PLA. Only the Santa Key Ornament was checked with a real test slice, and even that will vary on your setup. Your printer, settings, scale, colors, filament brand and local market will change the real numbers, so slice each file yourself and check prices at your own fairs before you plan or price.
Design Role Print time per piece (est.) Filament per piece (est.) Booth price idea (reference)
Serious Goose Can Opener Keychain Impulse 30 to 45 min 10 to 15 g $5 to $8
Snowman Name Ornament Impulse 45 to 60 min 15 to 25 g $8 to $12
Christmas Dumpling Ornament with Name Plates Impulse 1 to 1.5 h 20 to 30 g $8 to $12
Christmas Santa Key Ornament Impulse about 1 h 10 min about 25 g $8 to $12
Ribbon Christmas Ornaments Impulse 1 to 1.5 h 20 to 30 g $6 to $10
Flexi Goose Christmas Shelf Sitters Mid-price 2 to 3 h 30 to 50 g $12 to $18
Gingerbread Candle Holder Mid-price 1.5 to 2.5 h 30 to 50 g $10 to $15
Christmas Angel Tealight Holder Mid-price 1.5 to 2.5 h 30 to 50 g $10 to $15
Christmas Tic Tac Toe Mid-price 3 to 5 h 80 to 120 g $20 to $30
Christmas Shape Sorter Mid-price 4 to 6 h 120 to 180 g $25 to $35
Christmas Village Lamp Showpiece 2 to 4 h 40 to 70 g $15 to $25
Interchangeable Christmas Tree Kit Showpiece 5 to 7 h per tree 120 to 180 g $25 to $35
Christmas Paper Towel Holder Showpiece 6 to 9 h 200 to 300 g $30 to $45

What makers ordered most this season

These are the Christmas designs makers ordered most from our shops in the past 30 days. It is real order data from November 2026, ranked from most to least ordered.

1. Impulse buys under $10

Cheap, small items pay for your booth. Most shoppers spend under $10 on a whim, so keep a basket of ornaments and keychains near the front and the cash box.

Serious Goose Can Opener Keychain STL - 3D printed Christmas item to sell at craft fairs

Est. 30 to 45 min · 10 to 15 g per piece (reference)

Serious Goose Can Opener Keychain STL

A grumpy goose keychain that opens soda cans and saves your nails. Funny, useful and small enough to fill a whole basket by the register.

Booth price idea: $5 to $8 (reference only)

View design
Snowman Name Ornament STL Set - 3D printed Christmas item to sell at craft fairs

Est. 45 to 60 min · 15 to 25 g per piece (reference)

Snowman Name Ornament STL Set

Three snowmen in different hats with a name across the belly. Print the most popular names ahead and take orders for the rest.

Booth price idea: $8 to $12 (reference only)

View design
Christmas Santa Key Ornament STL Set - 3D printed Christmas item to sell at craft fairs

Est. about 1 h 10 min · about 25 g per piece (reference)

Christmas Santa Key Ornament STL Set

Eight golden keys with festive tags so Santa can get in on Christmas Eve, even without a chimney. A story families love, which makes it an easy sell.

Booth price idea: $8 to $12 (reference only)

View design
Ribbon Christmas Ornaments STL Set - 3D printed Christmas item to sell at craft fairs

Est. 1 to 1.5 h · 20 to 30 g per piece (reference)

Ribbon Christmas Ornaments STL Set

Santa, a snowman, a reindeer and more wrapped in a swirling ribbon. Hang a full row on a small tree stand and they sell as a set.

Booth price idea: $6 to $10 (reference only)

View design

Watch it printed

Snowman Name Ornament STL SetThree snowman name ornaments, each with a different hat.View design

More small sellers: ornaments · keychains and charms

2. Mid-price best sellers, $10 to $30

Mid-price items are where most of your profit comes from. They are big enough to feel like a real gift but still easy to buy without thinking twice.

Flexi Goose Christmas Shelf Sitters STL - 3D printed Christmas item to sell at craft fairs

Est. 2 to 3 h · 30 to 50 g per piece (reference)

Flexi Goose Christmas Shelf Sitters STL

Geese in holiday costumes with dangling flexi legs. Line them up on the edge of your table and people pick them up to wiggle the legs.

Booth price idea: $12 to $18 (reference only)

View design
Gingerbread Candle Holder STL Set - 3D printed Christmas item to sell at craft fairs

Est. 1.5 to 2.5 h · 30 to 50 g per piece (reference)

Gingerbread Candle Holder STL Set

Rings of smiling gingerbread friends that wrap around a jar candle. Sell them on their own or with a candle as a ready-made hostess gift.

Booth price idea: $10 to $15 (reference only)

View design
Christmas Angel Tealight Holder STL Set - 3D printed Christmas item to sell at craft fairs

Est. 1.5 to 2.5 h · 30 to 50 g per piece (reference)

Christmas Angel Tealight Holder STL Set

Five angels that glow from a tealight inside. Popular as memorial and sympathy gifts, which keeps them selling all season.

Booth price idea: $10 to $15 (reference only)

View design
Christmas Tic Tac Toe STL Bundle - 3D printed Christmas item to sell at craft fairs

Est. 3 to 5 h · 80 to 120 g per piece (reference)

Christmas Tic Tac Toe STL Bundle

Three holiday game boards with matching pieces. Grandparents buy these for the grandkids, and a board on the table invites shoppers to play.

Booth price idea: $20 to $30 (reference only)

View design
Christmas Shape Sorter STL Toy Set - 3D printed Christmas item to sell at craft fairs

Est. 4 to 6 h · 120 to 180 g per piece (reference)

Christmas Shape Sorter STL Toy Set

A gingerbread house, tree and snowman with chunky shapes to drop inside. A handmade toddler gift that parents and grandparents look for.

Booth price idea: $25 to $35 (reference only)

View design

Watch it printed

Christmas Tic Tac Toe STL BundleThree holiday game boards with festive pieces, ready for family game night.View design

Candle holders: sell them with battery LED tealights only. PLA starts to soften at around 60°C, so a real flame can warp or ignite a plastic holder. Put a small LED only sign on the table.

More mid-price ideas: flexi shelf sitters · candle holders · game boards

3. Showpieces that stop shoppers

One or two big, bright pieces make people stop at your booth. They may not sell as many units, but they bring shoppers close enough to find your ornaments and geese.

Christmas Village Lamp STL Set - 3D printed Christmas item to sell at craft fairs

Est. 2 to 4 h · 40 to 70 g per piece (reference)

Christmas Village Lamp STL Set

Gnome houses, a snow cottage and a gingerbread house that glow from LED tealights. Light them up and your booth glows on a dark winter evening.

Booth price idea: $15 to $25 (reference only)

View design
Interchangeable Christmas Tree Kit STL - 3D printed Christmas item to sell at craft fairs

Est. 5 to 7 h per tree · 120 to 180 g per piece (reference)

Interchangeable Christmas Tree Kit STL

Four trees and a table full of tiny charms to decorate them with. Set one out with loose charms and kids will pull their parents over.

Booth price idea: $25 to $35 (reference only)

View design
Christmas Paper Towel Holder STL Set - 3D printed Christmas item to sell at craft fairs

Est. 6 to 9 h · 200 to 300 g per piece (reference)

Christmas Paper Towel Holder STL Set

Santa, a snowman, a gnome, a reindeer and a cow that turn a kitchen roll into decor. Tall, bright and impossible to miss from the aisle.

Booth price idea: $30 to $45 (reference only)

View design

Watch it printed

Christmas Tree STL with Interchangeable CharmsSwap the charms and toppers to redecorate the tree again and again.View design

More showpieces: light-up lamps · paper towel holders · playsets

How to price 3D prints for a craft fair

Price by machine time first, then add filament, finishing and packaging, and round up. Filament is the smallest cost on most Christmas items, so pricing by weight alone leaves money on the table.

  1. Filament. Multiply grams by your cost per gram. At $20 per kg, that is $0.02 per gram, so a 25 g ornament uses about $0.50 of filament.
  2. Machine time. Pick an hourly rate that covers power, wear and failed prints, for example $1.50 per print hour.
  3. Finishing and packaging. Add ribbon, LED tealights, earring hooks, bags and tags.
  4. Round up to a simple price. $8, $10, $15 and $25 are easy to pay in cash and easy to bundle.

Here is a worked example with the one design we measured in a real test slice, the Santa Key Ornament:

Full set of 8 keys and 8 tags, measured on a Bambu Lab P1S: about 9 hours and 200 g of filament.

Per ornament: about 1 h 10 min and about 25 g.

Filament: 25 g × $0.02 = about $0.50

Machine time: 1.2 h × $1.50 = about $1.80

Ribbon and tag: about $0.50

Cost per ornament: about $2.80. Booth price idea: $8 to $10, or 3 for $25.

All costs and prices in this example are for reference only. Use your own filament cost, machine rate and local prices.

Watch the multicolor waste. In that test slice, about 36 g of the 200 g, or roughly 18 percent, was purge and prime tower waste from color changes. Multicolor prints look great at a fair, but count that waste in your costs, or group colors to cut down on swaps.

How much stock to print and when to start

Start two to three weeks before the fair with one printer. Here is an example plan for a first holiday market, based on our estimated print times.

For reference only. The hours below are rough estimates, not exact figures. Slice your own files to plan with real numbers.
Item How many Est. print hours
Can opener keychains 30 about 20 h
Name and key ornaments 40 about 45 h
Flexi geese 10 about 25 h
Candle rings and angel tealights 10 about 20 h
Village lamp houses 4 about 12 h
Tic tac toe boards 3 about 12 h
Paper towel holders 2 about 15 h
Total 99 items about 150 h, or about 15 days at 10 h a day
  • Print showpieces first. They take the longest and you only need a few.
  • Batch small items on one plate. A full plate of keychains or ornaments wastes less time on heating and leveling.
  • Keep a day for reprints and finishing. Stringing, failed layers and ribbon tying always take longer than you think.

Booth tips that sell more prints

Light, height and personalization sell more prints than a long product list. These small changes make the biggest difference on market day.

  • Turn the lights on. Put LED tealights in your village houses and angels. A glowing display stands out, especially at evening markets.
  • Use height. Put showpieces at the back on a riser, mid-price items in the middle and ornaments in front where hands can reach them.
  • Sell personalization. Print the most popular names ahead, and take orders for other names to pick up later or ship.
  • Bundle the small stuff. Offers like 3 ornaments for $25 raise the average sale without extra printing.
  • Let people touch. Leave a flexi goose and a tic tac toe board out as testers. Once shoppers pick something up, they are much more likely to buy.
  • Take your own photos. Use photos of your own prints for signs and social media. It is required by our license and it shows off your print quality.
  • Label kids items. Add a not for children under 3 note on anything with small parts.

Can you sell prints made from these files

Yes, a license to sell your prints is included free

Every Upfinityco purchase includes our License Agreement at no extra cost. Here is what it means for craft fair sellers:

  • Sell prints in any quantity at fairs, markets, online and in your own shop
  • Personalize the files with names, colors or a new scale and sell those prints
  • Paint, finish or add LED lights and ribbons before you sell

The limits: print the items yourself on printers you own or operate, with 10 printers or fewer. Do not share or resell the files, sell wholesale to other shops, or use our photos and videos to sell your prints. Keep your order number as proof of purchase, and make sure items for children meet product safety rules. Need more than 10 printers? Ask us about a Farm License.

Selling Christmas 3D prints FAQ

What 3D prints sell best at Christmas craft fairs?

The best sellers are small personalized ornaments and keychains under $10, mid-price items like flexi shelf sitters, candle holders and holiday game boards, and a few eye-catching showpieces such as light-up village houses and paper towel holders. A booth with all three price levels sells more than a booth full of one type of item.

How much should I charge for 3D prints at a craft fair?

Add up filament, machine time, finishing and packaging, then round up to a simple price point. Filament is usually the smallest part, often under $1 for an ornament, so price mainly by print time. As a starting point, small ornaments often sell for $6 to $12 and larger showpieces for $25 to $45, but these numbers are for reference only, so check prices at your own local fairs.

How long does it take to print stock for a craft fair?

Plan two to three weeks for one printer. Based on our estimates, a mixed stock of about 100 items takes around 140 to 150 print hours, or about two weeks at 10 print hours a day. These numbers are estimates for reference only, so slice your files first to plan with real numbers.

Can I sell prints made from Upfinityco STL files?

Yes. Every purchase includes a free license to sell physical prints in any quantity at markets, fairs, online and in your own shop, with no extra fee. You cannot share or resell the files themselves.

How many printers can I use to make prints for sale?

You must print the items yourself on printers you own or operate. Using more than 10 printers counts as a print farm and needs a separate Farm License, and wholesale to other shops is not included.

Can I use Upfinityco photos to sell my prints?

No. Take your own photos of your prints for signs, social media and online listings. Our photos, videos and renders cannot be used to advertise or sell prints.

What filament is best for craft fair prints?

PLA is the easiest choice for most Christmas items. Matte PLA looks handmade and premium, and silk PLA adds shine to ornaments. For lamps and candle holders, use LED tealights only, since PLA starts to soften at around 60 degrees Celsius.

Stock your holiday booth

Christmas STL and 3MF files with a free license to sell your prints. Instant download.

Browse Christmas designs
Selling at a holiday market this year? Share your booth photos in our Upfinityco Facebook community with nearly 50,000 makers.
About Upfinityco

Upfinityco designs seasonal and holiday 3D printable files in STL and 3MF formats for makers who print for their homes, for gifts and for craft fairs. We are the sister brand of LaserCutiny, a digital design shop for laser cutting. Every file is designed for FDM printers and includes a free license to sell your prints.